9
FINAL SET UP
!!! WARNING !!!
Failure to position the parts in accordance with all included
pictures, diagrams, and drawings, or failure to use only parts
specifically approved with this appliance may result in property
damage or personal injury.
!!! IMPORTANT !!!
Cover the pilot and valve assembly, at the side of the burner,
to protect it, before installing glass medium.
1-
Pour the proper glass medium over the entire burner, filling the burner pan. The glass medium should follow the slope of the
burner pan, covering the burner completely. ( SEE FIGURE 18 )
FIGURE 18
2-
Pour the decorative sand around the burner. DO NOT pour the decorative sand on the burner itself! ( SEE FIGURE 19 )
FIGURE 19
WARNING: DO NOT apply extra material not supplied or approved with this appliance.
CAUTION: DO NOT place glass medium, directly in the area of the safety pilot assembly!
WARNING: DO NOT place decorative sand around the valve. The valve will overheat! You must allow air flow around the valve.
