Fireco Dorgard Pro, Руководство пользователя

Страница: 14 / 24

Unbinding
3. When the unbind is successful the radio LED
will go solid amber on both parent and child for
4 seconds. The child will no longer be connected
but the parent remains in unbind mode for 1 hour
or until the bind button is pressed again.
2. The pro device you wish to disconnect
now needs to be put into unbind mode.
This can be done by pressing and holding
the bind button.
On a Dorgard Pro it is accessed through the
front casing using a 3mm screwdriver.
The radio LED will flash amber to indicate
in unbind mode.
On a Freedor Pro this can be found on the
PCB, accessed by removing the cover.
4
Installation
If it is necessary to bind a child device to a
different parent you will first need to unbind it.
1. To start the unbind process, press and hold
the blue bind button on the base of the parent
Transmitter/Repeater. The radio LED will flash
amber indicating in unbind mode.
Dorgard Pro
!
4
!
Page 12