Fireco Dorgard Pro, Руководство пользователя

Страница: 10 / 24

Repeat steps 3-4 from this position.
When survey is complete, switch transmitter to
the off position to conserve battery power.
To connect out of range devices, you will need to
install a repeater to extend the range.
Dorgard Pro Place the Survey Dorgard Pro at the position
a Dorgard Pro is to be fitted. Hold it at the bottom of the
fire door.
Depress the plunger to get a radio reading. If the Dorgard
Pro is in range of the Survey Transmitter, the top LED of
the Dorgard Pro will show solid green for 4 seconds. If the
Survey Dorgard Pro is not in range, the top LED will show
red for 4 seconds.
Freedor Pro Place the Survey Freedor Pro at the position
a Freedor Pro is to be fitted. Fit to the correct side of the
door, using the adjustable bracket provided.
4. Repeater Location
To identify a suitable location for the new Repeater bring the
Survey Pro device closer to the Survey Transmitter until you are
again in range (confirmed by a green LED).
!
Dorgard Pro
!
Dorgard Pro
!
Dorgard Pro
!
Dorgard Pro
!
Dorgard Pro
!
Dorgard Pro
!
Survey and
demo
!
Press the button on the front of the Freedor Pro to get a radio reading.
If the Freedor Pro is in range of the Survey Transmitter the right LED of
the Freedor Pro will show solid green for 4 seconds. If the Survey
Freedor Pro is not in range the right LED will show red for 4 seconds.
Repeat this process for all of the doors you wish to survey.
Dorgard Pro
!
!
Dorgard Pro
Dorgard Pro
!
!
Do
Page 8