background image

Contact us for assistance:  (866) 985-7877  |  www.wtliving.com 

      9

OPERATING INSTRUCTIONS

A minimum supply pressure of .5 psi is required for the purpose of input 

adjustment of propane gas. Storage of an appliance indoors is permissible  
only if the cylinder is disconnected and removed from the appliance. A cylinder 
must be stored outdoors in a well-ventilated area out of the reach of children. 
A disconnected cylinder must have dust caps tightly installed and must not 
be stored in a building, garage, or any other enclosed area. The minimum 

permissible gas supply pressure of 11 W.C. is required for purpose of hose 
adjustment. The minimum hourly of 17,500 BTU is required input rating for 

 

a heater for automatic operation rating less than full input rating.

The pressure regulator and hose assembly supplied with the appliance must 
be used.

The installation must conform with local codes, or in the absence of local codes, 
with national fuel gas code, ANSI Z223.1/NFPA54, natural gas and propane 
Installation Code, CSA B149.1, or propane storage and handling code, B149.2

A dented rusted or damaged propane cylinder may be hazardous and should 
be checked by your local cylinder supplier. Never use a propane cylinder 
with a damaged valve connection. The propane cylinder must be constructed 

and marked in accordance with the specifications for LPG tanks of the U.S. 

Department of Transportation (DOT) or the standard for cylinders, spheres and 
tubes for transportation of dangerous goods and commission, CAN/CSA-B339.

• The cylinder must have a listed overfilling prevention device.
• The cylinder must have a connection device compatible with the connection

for the appliance.

• The cylinder used must include a collar to protect the cylinder valve.
• Never connect an unregulated propane cylinder to the heater.

• Do not store a spare LP-gas

cylinder under or near this
appliance.

• Never fill the cylinder beyond

80 percent full.

• Place the dust cap on the

cylinder valve outlet whenever 
the cylinder is not in use. Only
install the type of dust cap
on the cylinder valve that is
provided with the cylinder
valve. Other types of caps or
plugs may result in leakage of
propane.

Содержание Lux Series















Отзывы: