Contact us for assistance: (866) 985-7877 | www.wtliving.com
16
CARE & MAINTENANCE
WARNING
FOR YOUR SAFETY
•
Do NOT touch or move
fire
pit
for at least 45 minutes after use.
•
Burner is hot to the touch.
•
Allow burner to cool before
touching.
To enjoy years of outstanding performance from your fire pit, make sure
you perform the following maintenance activities on a regular basis:
1.
Use warm soapy water for cleaning. Never use flammable or corrosive
cleaning agents.
2.
While cleaning your unit, be sure to keep the area around the burner and
control compartment dry at all times. Do not submerge the control valve
assembly. If the gas control is submerged in water, do NOT use it. It must
be replaced. Make sure
fire
pit has cooled completely before cleaning or
covering with a cover.
A.
Keep the appliance area clear and free from combustible materials,
gasoline and other flammable vapors and liquids.
B.
Do not obstruct the flow of combustion and ventilation air.
C.
Keep the ventilation opening(s) of the cylinder enclosure free and clear
from debris.
3.
Air flow must be unobstructed. Keep controls, burner, and circulating air
passageways clean. Signs of possible blockage include:
• Gas odor with extreme yellow tipping of flame
• Fire pit does NOT reach the desired temperature.
• Fire pit glow is excessively uneven.
• Fire pit makes popping noise.
• Spiders and insects can nest in burner or orifices. This dangerous
condition can damage fire pit and render it unsafe for use. Clean
burner holes by using a heavy-duty pipe cleaner. Compressed air
may help clear away smaller particles.
• Carbon deposits may create a fire hazard. Clean burner screen with
warm soapy water if any carbon deposits develop.
Note:
In a salt-air environment (such as near an ocean), corrosion
occurs more quickly than normal. Frequently check for corroded areas
and repair them promptly.
SERVICE:
Only a qualified service person
should repair gas passages and
associated components.
Caution:
Always allow fire pit to cool
before attempting service.
STORAGE
:
between uses:
• Turn control knob OFF.
• Disconnect LP source.
• Store fire pit in an area sheltered
from direct contact with
inclement weather (such
as rain, sleet, hail, snow, dust
and debris).
• If desired, cover fire pit to
protect exterior surfaces and to
help prevent build-up in air
passages.
During periods of extended
inactivity or when transporting:
• Turn control knob OFF.
• Disconnect LP source and move
to a secure, well-ventilated
location outdoors.
• Store fire pit in an area sheltered
from direct contact with
inclement weather (such as rain,
sleet, hail, snow dust and
debris).
• If desired, cover fire pit to
protect exterior surfaces and to
help prevent build-up in
air passages. Never leave LP
cylinder exposed to direct
sunlight or excessive heat.
Note:
Wait until fire pit
is cool before covering.
Содержание Bellante
Страница 2: ......
