Fire Sense Bellante Скачать руководство пользователя страница 13

 

13

   

WARNING

Make sure all appliance components are completely cooled and gas supply is turned off and removed 
from the appliance prior to performing the conversion.

   

WARNING

Make sure all control knobs and cylinder valves are in OFF position before converting.

tanks and their use are covered elsewhere in this manual). If a Natural Gas connection is available, the user may wish to 
change the gas delivery system to the more permanent Natural Gas Supply.

This  appliance  is  certified  for  use  with  either  Liquid  Propane  (LP  Gas)  or  Natural  Gas  and  comes  complete  with  the 
necessary parts to convert the appliance for use with Natural Gas. A Natural Gas hose and regulator are also required and 
are  sold  separately.  The  conversion  valves  allow  the  use  of  Natural  Gas  without  replacing  the  burners  or  entire  valve 
system.

The process of converting the burner from Propane to Natural Gas is relatively simple and can be accomplished by any handy 
homeowner. We recommend, however, that a qualified gas technician do the conversion. Your warranty may be voided if 
the  conversion  is  improperly  completed.  Please  retain  the  parts  supplied  with  the appliance  and  these  instructions  so  the 
technician can do the conversion.

Orifice  Chart

The different burner valves in this appliance have different BTU ratings. The holes in the orifices are drilled to different sizes so as 
to allow the proper amount of gas to flow through them. Please note the chart below to give an easy reference for the various 
orifice opening sizes for the different valves in the appliance.

Propane (Pressure 11”)

NG (Pressure 7”)

Input Rate (BTU/h)

Input Rate (BTU/h)

2.3mm

5

5

,000

3.

78

mm

5

5

,000

NG Hose and Regulator Conversion 
Tools Required:

Adjustable Wrench

CONVERSION

 

TO

 

NATURAL GAS

Contact us for assistance:  (866) 985-7877  |  www.wtliving.com 

Содержание Bellante



















Отзывы: