Fire-Lite Alarms LED-10, Руководство пользователя

Страница: 8 / 24

8 8
8 8 8
Document 50400 Rev A 5/15/96 P/N 50400:A
ADDRESS SWITCH SETTINGS ADDRESS SWITCH
1 2 3 4 5 6 1 2 3
INVALID 0 0 0 0 0 0 17 0 1 0
01 0 0 0 0 0 1 18 0 1 0
02 0 0 0 0 1 0 19 0 1 0
03 0 0 0 0 1 1 20 0 1 0
04 0 0 0 1 0 0 21 0 1 0
05 0 0 0 1 0 1 22 0 1 0
06 0 0 0 1 1 0 23 0 1 0
07 0 0 0 1 1 1 24 0 1 1
08 0 0 1 0 0 0 25 0 1 1
09 0 0 1 0 0 1 26 0 1 1
10 0 0 1 0 1 0 27 0 1 1
11 0 0 1 0 1 1 28 0 1 1
12 0 0 1 1 0 0 29 0 1 1
13 0 0 1 1 0 1 30 0 1 1
14 0 0 1 1 1 0 31 0 1 1
15 0 0 1 1 1 1 32 1 0 0
16 0 1 0 0 0 0
NOTES: NOTES: NOTES: NOTES: NOTES:
1) EIA-485:
EIA-485: EIA-485: EIA-485: EIA-485: Maximum of 6,000 feet total cable length from FACP to LED-10s. Circuit is power-
limited.
2) Up to 32 LED-10s may be used on the EIA-485 circuit. The MS-5210UD can power a maximum
of seven LED-10s. If additional LED-10s are connected, the Fire•Lite FCPS-24F may be used
to supply additional power. (Power supplies used for this purpose must have their negative
terminals commoned together).
3) Between each LED-10 are four wires: A twisted-shielded pair for data communications and a
pair for 24 VDC power.
Figure 1-4: Typical Configuration Figure 1-4: Typical Configuration Figure 1-4: Typical Configuration Figure 1-4: Typical Configuration Figure 1-4: Typical Configuration
Table 1-1: LED-10 Addressing Table 1-1: LED-10 Addressing Table 1-1: LED-10 Addressing Table 1-1: LED-10 Addressing Table 1-1: LED-10 Addressing
Typical Configuration Typical Configuration Typical Configuration Typical Configuration Typical Configuration
The LED-10 indicates the status of the MS-5210UD, while offering multiple annunciator
locations with the capability of remote Acknowledge, Signal Silence, Drill and Reset
functions. The LED-10 displays zone status and requires no programming.
General InformationGeneral InformationGeneral InformationGeneral InformationGeneral Information
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com