manualshive.com logo in svg

Fire-Lite Alarms LED-10, Руководство пользователя

Поделиться
Скачать
Fire-Lite Alarms LED-10 Скачать руководство пользователя страница 11

11

11

11

11

11

Document 50400    Rev A    5/15/96    P/N 50400:A

Silence

Silence

Silence

Silence

Silence

When the Silence key is pressed and released, the
LED-10 sends a Signal Silence command to the
control panel.  The Silence key performs the same
functions as the Acknowledge key.  In addition, if an
alarm exists, it turns off all 

silenceable NAC outputs

only and causes the FACP ALARM SILENCE LED
and the LED-10 SIGNAL SILENCE LED to turn on.  It also sends an ALARM
SILENCED message to the printer and the history file within the MS-5210UD.  A
subsequent new alarm will resound the appropriate Notification Appliance Circuits
(NACs) and local sounders.

Drill: Hold 2 Sec.

Drill: Hold 2 Sec.

Drill: Hold 2 Sec.

Drill: Hold 2 Sec.

Drill: Hold 2 Sec.

When the Drill key is pressed and held for at least
two seconds (time required to prevent accidental
activations), the LED-10 will transmit a drill com-
mand to the control panel.  This command causes
the FACP to turn on all main panel NAC outputs.  In
the event that the system was previously silenced, the drill command will also turn
off the ALARM SILENCE LED.  (The Silence key operates on 

silenceable NAC

outputs only).

Reset

Reset

Reset

Reset

Reset

When the System Reset key is pressed and released,
the LED-10 sends a Reset command to the control
panel.  This will turn off all Notification Appliance
Circuits, temporarily turns off resettable power to 4-
wire detectors, and sends a "SYSTEM RESET'
message to the FACP display, printer and MS-5210UD history files.  It also turns on
all system LEDs, piezo sounders and FACP LED display segments as long as the
Reset key is held (lamp test).  Any alarm or trouble that exists after a Reset will
resound the system.

OperationOperationOperationOperationOperation

Technical Manuals Online! - http://www.tech-man.com

firealarmresources.com

Содержание LED-10

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды