Fire Burglary Instruments LEGEND series, Руководство пользователя

Страница: 8 / 9

KEYPAD EMERGENCY CONDITIONS
In addition to individual zone alarms various conditions can be
transmitted directly through the keypad. These conditions are
initiated through the simultaneous depression of two keys, as
shown below;
Reset
Keypad
Condition 2
LED KEYPAD LAYOUT
Keypad
Condition 1
The keypad emergency conditions are programmable and can
be used for conditions such as PANIC, FIRE, or MEDICAL
Emergency. These conditions can be programmed by your installer
to suit your needs. The keypad emergency conditions are active 24
hours a day, whether the system is armed or disarmed.
For example if keypad emergency condition 1 has been defined
by your installer as a PANIC
,
then an emergency panic signal can
be sent by hitting the * and # keys at the same time.
The RESET (3+1) command can be used to acknowledge
conditions such as alarms and troubles at the keypad if the reset
13
function has been enabled by your installer.
The DURESS signal is meant to disarm the system and transmit
an emergency signal to the Central Station indicating that there is
a problem.
The DURESS capability must be enabled by your installer and
can be initiated in one of two methods;
-
either by entry of user code #16
or
- entry of a valid user code with the last digit altered by one. For
example, if there is a valid user code of 1234 then duress codes of
1233 or 1232 exist for that user.
Upon entry of the duress code, the system will disarm in a
normal fashion and optionally transmit the duress signal to the
Central Station.
NOTE: The DURESS capability is
only
available if activated by
your installer. Please contact your installer to determine whether
duress has been activated and the method used.
14