16
id.:
D 70SL
REV. 00 02/11/2009
INTRODUCTION
1
1.7 DRIVER OF THE VEHICLE
Road driving of the vehicle is naturally governed by Road Traffi c Regulations, and therefore the driver shall be
equipped with a driving license as required.
In order to use the machine on the worksite, the operator must be of the minimum age established by applicable
legislation in the country of use. The operator may use the machine only after receiving adequate and specifi c
training.
This training must ensure that the machine is used correctly in relation to the risks which may arise for the
driver or other people.
Driving an earth moving machine always requires technical skills and training, in addition to a strong sense
of responsibility. The operator must therefore have specifi c psychophysical requisites to qualify for this job.
Therefore, only authorised personnel may use these vehicles.
The operators must be duly trained on the use of the machine and instructed about any possible risks at the
workplace.
We recommend that all staff follow a training course aimed at learning how to use the machine safely and
effi ciently and getting specifi c knowledge on the engine and hydraulic system operation, in order to perform
cleaning and maintenance operations.
The machine must only be driven and serviced by persons who:
- have an excellent eyesight and colour perception, good hearing, co-ordination and sharp refl exes;
- are physically and mentally eligible for this type of job, and are able to meet the requirements connected with
the machine operation at peak performance levels;
- refrain from operating the machine when they are tired, unwell or under the infl uence of drugs, alcohol or
medicines which may affect their physical abilities or sharpness of their refl exes;
-are able to read and properly understand the instructions contained in this manual, according to the
Manufacturer’s purposes;
-
have an excellent ability to assess weight, distance and size;
- are able to drive and control the machine at the worksite;
-have been trained on the operation of the machine and its maintenance, know its technical specifi cations, its
overall dimensions as well as its performance and limitations;
- are conscientious, careful and aware of the problems of their own safety and that of other people, animals,
property, the machine itself and the environment;
- are knowledgeable with the safety rules and regulations applicable to the workplace.
The Legal Representative of the company which owns the vehicle shall appoint the staff who possess the
above said requisites to perform the tasks required.
The operator is also responsible for and shall assure that:
- nobody approaches the machine when it is working;
- no unauthorised and untrained personnel may use the machine;
- the safety procedures learnt during the training course are observed every day;
- potential hazards in the workplace are recognised and avoided;
- the caution and warning labels and plates have been read and understood, and their instructions observed
(see Section 3 “Safety Labels and Decals”);
- the machine has been inspected and its proper working condition checked before starting the work shift;
- report any operational problems encountered before, or while operating the machine;
- reckless or careless actions, which may endanger his own safety as well as other people’s safety, are
avoided;
- common sense is used at all times and safety has absolute priority.
The machine is manufactured and supplied for its intended use, as specifi ed in this manual. Operators are
reminded that, when using the machine, they must always and under all circumstances behave following
active safety principles, in order to enhance the overall safety level of the machine. Prior to commencing work,
the operator must check that all the safety devices are active and functioning properly: he/she is obliged to
refuse to start work in the event that the requirements for safe working are not met.
Содержание D 70 SL
