Fiorenzato | Cod. AllGround_001 Ed. 01/2021
67 / 116
EN
6 GRINDER MAINTENANCE
6.1 Ordinary maintenance
Your
grinder does not require any significant routine maintenance operations
except for periodic cleaning that must be done by following the operating procedures
below.
ATTENTION!
Before doing any cleaning work, disconnect the grinder from
the power supply by turning the appropriate switch to the “O” (OFF) position
(Fig. 14) and remove the power plug from the relative power socket (Fig. 15).
ON
OFF
ON
OFF
Fig. 14
Fig. 15
ORDINARY MAINTENANCE INTERVENTIONS
Frequency
Type of Intervention
Paragraph
After each use
Precise equipment cleaning
6.1.1
After each use
Supply cable status check
6.1.2
Every 6 months
Final cleaning of grinders
6.1.3
Whenever necessary
Storing the grinder
6.1.4
ATTENTION!
“Red speed” type grinders, whose surface has been specially
treated to increase resistance to wear, are installed in
grinders.
This treatment is done to ensure that the grinders work in optimal conditions
throughout the machine’s entire life. If, however, the grinders are damaged
(e.g. if the removable chamber is accidentally dropped on the floor and/or
if any hard foreign objects have been accidentally placed in the grinding
chamber), they must only be replaced by a trusted specialist repair service.