14
SCRUBBING WIDTH ADJUSTMENT
The scrubber machine width can be adjusted , 70 cm. to 80 cm.
This operation can be done only if the different brushes ,brush covering cater and the
squeegee.
Scrubbing width adjustment for Central brushes version:
•
Extract the main key from the control dashboard in order to avoid any accident.
•
Remove the brush covering cater as per explanation n(brush replacement).
•
Modify the width of the two brush plates by operating on the adjustment lever placed on the
lower side of the machine(Fig. 11); The lever must be lifted up lightly in order to unhooked
itself from its standard position ,move and lower it from left to right position or in the other
hand..
•
Put the brushes of the wished size (brush Ø 340mm for 70 cm version., brush Ø 390 mm for 80
cm. version).
•
Put the brush covering carter (the left brush covering carter remains the same for both versions,
the right ones must be replaced).
•
Replace the squeegee and put the one wished.
Fig. 11
Scrubbing width adjustment for front brushes version:
•
Extract the main key from the control dashboard in order to avoid any accident.
•
Remove the brush covering carter and the brushes as per above description(brush replacement).
•
Modify the width of the two brush plate by operating on the adjustment lever placed on the
front side of the machine (Fig. 12);The lever must be lifted up lightly in order to unhooked itself
from its standard position ,move and lower it from left to right position or in the other hand.
•
Put the brushes of wished size (brush Ø 340mm for 70 cm. version, brush Ø 390 for 80 cm
version.)
•
Put the brush covering carter.
•
Replace the squeegee and put the one wished .
1.
brushes plate
2.
bracket to fix the adjustment plate
lever
3.
adjustment lever
