13
BRUSH REPLACEMENT
In order to replace the brushes(Fig10) is necessary to proceed in the follow way:
•
Extract the main key from the control dashboard in order to avoid any accident.
•
-
Remove the brush covering carter unloosing the knob (fig. 10-a) and rotating the carter
towards external direction.
-
For the machine equipped with frontal brushes is necessary to remove the brushes covering
carter by pulling it towards the front side of the machine.
•
Release the brushes by rotating them in the follow way:
-
Right brush in anti-clockwise direction.
-
Left brush in clockwise direction.
.
•
After this operation please remember to put again the brushes covering carter and fix them
through knobs.
Fig. 10-a Fig. 10-b
1.
brush covering carter knob
2.
pintle brush
3.
brush
4.
brush cover
