14
VACUUM MOTOR MAINTENANCE
The vacuum motors must be checked and cleaned. The brushes should be checked all six months
and replaced, if necessary. After removing the key from the dashboard, unscrew the screw in the
vacuum motor space, open it, unhook the hooks and detach the plug . In this way, it is possible to
extract the motors and release the sponge filter under the motors that can be extracted, cleaned and
replaced. Check the suction fan from the hole located in the front part of the vacuum motor. By a
visual check, the fan should appear undamaged and well-cleaned. To check the brushes, first of all
remove the plastic cap, then unscrew the screws and remove the two plastic supports of the
brushes. Once checked and replaced (if necessary), the brushes can be easily remounted, by
reassembling all elements until the initial situation has been reached.
Fig. 6
CAUTION
Each maintenance and repair operation not described under the “ordinary maintenance”
should be performed by qualified personnel authorized by FIORENTINI s.r.l. only.
CONTROLS
1.
plastic cap
2.
carbon brushes
3.
carbon brushes screws
