12
OPERATIONS ON THE ELECTRIC INSTALLATION
The operations on the electric installation can be performed only by QUALIFIED
ELECTRICIANS, instructed in the electric characteristics of the machine and in accident
prevention rules.
CHECKS
The machine must be inspected by a technician, who checks the safety conditions of the machine
and any possible damages or defects visible from outside:
- before setting the machine at work
- after appropriate time intervals
- after any changes or repairs
- safety device control
SAFETY DEVICE CONTROL
All six month, check the efficiency of the safety devices, the inspection should be performed by
qualified personnel of FIORENTINI s.r.l. or authorized by it. To grant the efficiency of the safety
devices, the machine should be overhauled by a technician of FIORENTINI every 5 months.
ANNUAL CHECK
The responsible person should perform an annual check to determine if the machine complies with
the technical safety standards. After this check, the responsible person should apply a test plate on
the machine.
INFORMATION FOR USING THE MACHINE IN EXPLOSIVE ATMOSPHERE
The machine has not been designed to work in environments in which explosive gas, powders or
steams can be generated.
DANGER
To drain the liquids used for floor scrubbing, follow the local standards concerning the elimination
and purification.
INFORMATION CONCERNING THE MACHINE DEMOLITION<R>(CEE STANDARDS)
In case of machine demolition, it is important to subdivide the different types of materials
composing the machine and deliver the batteries to operators authorized to their elimination.
MAINTENANCE SCHEDULE
During the cleaning and the maintenance of the machine remove the key.
DAILY
•
Clean the recovery tank and the filter of the vacuum motors.
WEEKLY
•
Check for the cleaning of the suction pipes and of the squeegee
•
Check the state of the rubber squeegee blades
MONTHLY
•
Check the filter of the clean water tank
EACH YEAR
•
Check the brush state of each motor
AFTER TWO YEARS
•
Check safety systems
Check electric installation
