TECHNICAL DATA
I42TD – I60TD
Rev. 00
January 2005
19/36
Sqeegee regulation
The squeegee has to be well regulated in order to have a perfect dry system. This kind of squeegee can
perfectly suck water, which flows into the suction pipe, but it must be parallel to the surface.
The operator has to follow the instructions below for the squeegee adjustment:
Remove the ignition key from the dashboard in order to avoid the casual starting of the machine;
unscrew the upper screws and tighten the lower ones if the blades are more pressed at the ends. Do
the opposite if the blades are more pressed in the middle;
For the pressure regulation the operator has to tighten or to widen the ring nut;
By means of the knob (see detail nr. 2 in picture nr. 4.11.) regulate the squeegee. The best squeegee
pressure is reached when the corner of its blade is in contact with the floor and their inclination is
between 45° and 60°.
1. discharge mouth
2. squeegee regulation screws
3. squeegee release knobs
Picture no. 11
