TECHNICAL DATA
I42TD – I60TD
Rev. 00
January 2005
18/36
Brushes replacement
Follow the instructions below for the brushes replacement (picture no. 10):
Remove the ignition key from the dashboard in order to avoid a casual starting of the machine;
Unscrew the knobs and remove the cover brushes case;
Turn each brush until the operator can reach and unscrew the knob. Slightly press the knob and
remove the brush;
Setting a new brush up:
Match the female hexagon of the joint and the male join of the motor;
Lift vertically up the brush and turn it until it will be automatically set up;
Set up again the case and screw again the knobs.
1) discharge mouth
2) squeegee screws regulation
3) squeegee knobs release
4) brushes female joint
5) brushes joint knob
6) case fixing knob
7) brushes cover case
Picture no. 10
