TECHNICAL DATA
I42TD – I60TD
Rev. 00
January 2005
15/36
Modalità d’uso della macchina.
The operator, thanks to his/her experience, has to choose the right kind of brush and detergent for the
surfaces that has to be washed and to decide if the floor needs a second washing.
Follow these instructions for a correct washing:
1. press the brushes motor switch;
2. press the solution solenoid valve switch;
3. press the suction switch.
By means of the accelerator pedal the washing brushes and the suction motor are activated. On the
contrary, both the washing brushes and the suction motor are disactivated after a few seconds if the operator
leaves this pedal. Before the surface is completely dry, the operator must switch the solution solenoid valve
off because this is not activated/disactivated by the accelerator pedal.
The operator has to do a second washing if the surface is particularly dirty:
1. wash the surface with the squeegee up and the brushes down;
2. activate the brushes;
3. press the solution solenoid valve switch;
4. leave the solution on the surface to dissolve the dirt;
5. do a second washing with brushes and squeegee down, the suction activated and the solution solenoid
valve open.
Washing brush up
Washing brush down
Squeegee down
Squeegee up
Squeegee suction
Lights
Flashing light
Important: swicth on the flashing light before starting the machine.
