BRUSHES REPLACEMENT
Before replacing the brushes, extract the key from the control dashboard, thus avoiding
that any accidental ignition of some motors could cause damages. First of all remove the
knobs (fig.) by unscrewing them, then extract the brush covering carter (fig.). Rotate each
brush until its knob (fig.) can be reached, then extract it and remove the brush fallen on the
ground. To insert the new brush, place the hexagon of the female joint (fig.) under the male
joint located on the motor, then lift the brush vertically by rotating it until its automatic inser-
tion has been reached. After placing the three brushes, insert the carter and screw the
knobs again.
fig. 9
1) brush joint plug
2) brush joint intake
3) brush release joint
4) brush cover
Содержание I38UE
Страница 9: ......