Finn HydroSeeder T170 SSA, Руководство по эксплуатации и каталог запасных частей

Страница: 10 / 80

OPERATION AND MAINTENANCE
MANUAL FOR
FINN T170 HYDROSEEDERS
®
This manual gives you step by step instructions for the operation and maintenance of the Finn
HydroSeeder
®
. For best results and to insure longer life of the equipment, please follow the instructions
carefully. For your safety read the entire manual before operation of this unit.
DEFINITION OF HYDROSEEDING:
Hydroseeding is the process whereby seed, fertilizer and/or lime and wood fiber mulch (using water as a
carrying medium) are applied on the soil to establish vegetation.
THE FINN HYDROSEEDER
®
AND HOW IT WORKS:
The Finn HydroSeeder
®
will apply seed, fertilizer and/or lime, wood fiber mulch, or stabilizing materials
in any prescribed or desired combination. The materials placed in the HydroSeeder
®
slurry-tank are mixed
with water and kept in suspension by a dual agitation process, recirculation of slurry and mechanical agita-
tion, thus forming a slurry that is pumped to the discharge assembly and directed onto the seed bed by the
operator. This equipment is designed to accomplish hydroseeding in one easy operation with maximum effi-
ciency.
MOUNTING THE HYDROSEEDER
®
:
For speed and mobility of operation, the HydroSeeder
®
should be mounted on a truck or trailer, however,
it is important to select a carrier with sufficient capacity to handle the added weight.
DIMENSIONS, CAPACITIES, AND TRUCK REQUIREMENTS:
*CF - Back of cab to end of frame
C - Distance from HydroSeeder® front to center of gravity
*CA - Back of cab to center of rear axle or trunnion on tandem
*FE - Front axle weight – Empty
*FL - Front axle weight – Loaded
G - Distance from center of bogie to HydroSeeder® center of
gravity
HW - HydroSeeder® weight
*RE - Rear axle weight – Empty
*RL - Rear axle weight – Loaded
*WB - Truck wheel base
* These dimensions needed from the truck supplier as well as
Front axle capacity and Rear axle capacity.
** Truck GVW depends on the truck weight. CA dimensions
are approximate only, and depend on the front and rear axle
capacities, as well as the front and rear empty axle weights.
*** Weight of HydroSeeder®, water, and full charge of granular
solids only. No auxiliary equipment or loads included.
6
T170
Truck GVW Pounds 33,000
** (kg) (14,970)
CA inches 108+
** (cm) (275+)
C inches 71
(cm) (180)
OAL Inches 183
(cm) (465)
Water Only
HW Pounds 20,700
(kg) (9,390)
Full Load
HW Pounds 23,600
*** (kg) (10,705)