Finn BARK BLOWER BB-1208, Руководство по эксплуатации и каталог запасных частей

Страница: 10 / 71

4
NOTE: Be careful not to allow fuel, lubricant, hydrau-
lic fluid, or cooling fluids to penetrate into the ground
or be discharged into the water system. Collect all
used fluids and dispose of them properly.
6. It is recommended that only authorized genuine
FINN replacement parts be used on this machine.
7. Do not use ether cold start fluid if engine is equipped
with glow plug type preheater or other intake mani-
fold type preheater. It could cause an explosion or
fire and severe injury or death.
8. Diesel fuel or hydraulic
fluid under pressure can
penetrate the skin or eyes
and cause injury, blindness
or death. To check for
such leaks, use a piece of
cardboard or wood instead
of your hand. Pressure
may build up in the hydrau-
lic system so use caution when removing the cap.
9. Some parts and assemblies are quite heavy. Before
attempting to unfasten any heavy part or assembly,
arrange to support it by means of a hoist, by blocking
or by use of an adequate arrangement to prevent it
from falling, tipping, swinging or moving in any man-
ner which may damage it or injure someone.
10. If repairs require use of a torch or electric welder, be
sure that all flammable and combustible materials
are removed. Fuel or oil reservoirs must be emptied,
steam cleaned and filled with clean water before
any cutting or welding on them is attempted. Do
NOT weld or cut on any tank containing oil, gasoline
or their fumes or other flammable material, or any
container whose contents or previous contents are
unknown.