Finlux FXVT 60, Инструкции по эксплуатации и монтажу

Страница: 9 / 48

8
Electrical connection of your hob
· Before proceeding with the electrical connection, verify that the current carrying
capacity of the system and the socket is adequate for the maximum power rating of
the hob.
. Electrical installation of the residence and the electrical current plug in use must
be earthed and conform with safety regulations.
· If there is no dedicated hob circuit and fused switch, they must be installed by a
qualified electrician before the hob is connected.
· Fused switch must be easily accessible once the hob has been installed.
· Do not use adaptors, multiple sockets and/or extension leads.
· This appliance conforms with the requirements ofthe following EEC Directives:
1. Vitroceramic hob EEC/73/23 and 93/68, EEC/89/336 relating to radio
interference,
2. EEC/89/109 relating to contact with foods.
· A circuit breaker with a contact opening of at least 3mm, rated 20A and delayed
functioning type must be installed inside the supply circuit.