English
- 10 -
Picture Menu Contents
Mode
You can change the picture mode to suit your preference or requirements. The Picture mode
can be set to one of these options:
Cinema
,
Game
,
Sport
,
Dynamic
and
Natural
.
Contrast
Sets the lightness and darkness values of the screen.
Brightness
Sets the brightness value for the screen.
Sharpness
Sets the sharpness value for the objects displayed on the screen.
Colour
Sets the colour value, adjusting the colors.
Power Save
Mode
To set the Power Save Mode as Eco, Picture Off and Disabled. See the section, “Environmental
Information” in this manual for further information on the Power Save Mode. If Picture Off is
selected, “Screen will be off in 15 seconds” message will be displayed on the screen. Select
PROCEED and press OK to continue. The screen will be off in 15 seconds. If you disable Power
Save Mode, Picture mode will be automatically set to Dynamic.
Backlight
(optional)
This setting controls the backlight level and it can be set to
Auto
,
Maximum
,
Minimum
or
Eco Mode
.
The Backlight function will be inactive if the Power Save
Mode is set to On. The Backlight cannot be activated in VGA, Media Browser
mode or while the picture mode is set to Game.
Noise
Reduction
If the broadcast signal is weak and the picture is noisy, use the
Noise Reduction
setting to
reduce the amount of noise. Noise Reduction can be set to one of these options:
Low
,
Medium
,
High
or
Off
.
Advanced Settings
Dynamic
Contrast
You can change the contrast rate by using the dynamic contrast function. Dynamic contrast
can be set to one of these options:
Low
,
Medium
,
High
or
Off.
Colour Temp
Sets the desired colour tone.
Picture Zoom
Sets the picture size to Auto,16:9, Subtitle,14:9, 14:9 Zoom, 4:3 or Cinema.
Auto (Only available in Scart mode with SCART PIN8 high voltage/low voltage switching).
HDMI True
Black
While watching from a HDMI source, this feature will be visible in the Picture Settings
menu. You can use this feature to enhance the blackness in the picture.
Film Mode
Films are recorded at a different number of frames per second to normal television programmes.
Turn this feature on when you are watching films to see the fast motion scenes clearly.
Skin Tone
Adjust the desired skin tone.
Colour Shift
Adjust the desired colour tone.
RGB Gain
Press
OK
button to edit RGB gain. You can configure the colour temperature values using
the RGB Gain feature.
Reset
Resets the picture settings to factory default settings.
Autoposition
(in PC mode)
Automatically optimizes the display. Press
OK
to optimize.
H Position
(in PC mode)
This item shifts the image horizontally to the right hand side or left hand side of the screen.
V Position
(in PC mode)
This item shifts the image vertically towards the top or bottom of the screen.
Dot Clock
(in PC mode)
Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs or text in smaller fonts.
Phase (in PC
mode)
Depending on the resolution and scan frequency that you input to the TV set, you may see
a hazy or noisy picture on the screen. In such a case you can use this item to get a clear
picture by using trial and error.
While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be
added to the Picture Settings while in PC mode.
Menu Features and Functions
