Finkbeiner EHB702, Руководство по эксплуатации

Страница: 27 / 56

Detailed operation instructions
Walter Finkbeiner GmbH
Alte Poststrasse 9/11
72250 Freudenstadt / Germany
www.finkbeiner.eu
27 / 56
PB-BA-EHB702-102GB
22.02.2011
6.5 Operation
Connect power supply plug into appropriate mains (clockwise phase sequence!).
Switch-on main switch at master column.
Press the START- button, the green START- lamp now illuminates.
Select operation mode at selector switch: Common or Single operation, optional pair operation.
Information common operation
•
Common operation from any column possible.
•
Common operation is indicated by the green “common cycle“ lamp at the master
column.
•
Common operation is only possible if all columns are within the same “cycle”. For
that either all columns have to be within the YELLOW cycle, or all columns within
the BLUE cycle. That’s the case if on all columns either all YELLOW or all BLUE
cycle lamps illuminate.
•
Different cycles (yellow/ blue) can be adjusted in Single operation mode by lifting
resp. lowering.
•
In common operation the synchronization control is regulating the speed of the
individual columns, in order to keep always synchronized movement also at un-
even load distribution. Thereby the movement of the columns to be re-adjusted is
shortly interrupted.
•
When releasing the push-button UP/ DOWN in common operation, the movement
is interrupted if all columns are within the common cycle.
Information single operation
•
In Single mode lifting and lowering is possible from each column.
•
When operating several columns simultaneously, no different ways of movement
are possible at one time. Only the movement of the push-button, that was pressed
first, will be carried out.
•
Single mode is shown by a RED blinking lamp at each column.
•
When releasing the push button UP/ DOWN in common operation, the movement
is interrupted immediately.
•
The EMERGENY-STOP push-button at each column switches off immediately the
complete lift set.
•
The activated EMERGENY-STOP push-button is locked and needs to be released
to operate the lift.