http://en.fineart-light.com
- 5 -
the lamp, fuse and so on. Always keep earthing connection.
Make sure that the main power supply you use is up to local
construction and electronic code regulation, the over-load
protection and reliable earthing are essential.
Do not make the equipment expose in the rain or in the moist
environment.
For any query not included in the manuals, please get service
from a qualified technician.
Protecting against
ultraviolet radiation or lamp explosion
Do not operate the machine without lens or shield and damaged
machine.
Allow the fixture to cool for at least 15 minutes before replacing
the lamp, and please protect your hands and eyes with gloves
and safely glasses.
Please do not stare at the light beam.
Change the damaged lamp or lamp over before its service life.
Protecting against burning or fire
Do not use directly short-circuit the thermostatic switch or fuses.
Keep all combustible materials (fabric, wood, paper) at least 1
meter away from the fixture and keep flammable materials far
away from the fixture.
Do not illuminate surface within 3 meters of the fixture.
Provide a minimum clearance of 0.1 meters around fans and air
vents.
Do not put any filters or other materials on the lens.
Allow thee fixture to cool for at least 15 minutes before transit.
Do not revise the fixture or install any parts not from
GUANGZHOU CHAI YI LIGHT CO., LTD.
Do not operate the fixture when the ambient temperature
exceeds 40.
