http://en.fineart-light.com
- 30 -
Routine maintenance
The FINE 2000/2500BEAM product requires routine cleaning. The
service life depends on the operating environment heavily. Please
kindly contact GUANGZHOU CHAI YI LIGHT CO., LTD for more
maintenance indications not included in this user’s manual. Thanks.
Important! Excessive dust, smoke fluid and particulate buildup will
degrade performance and cause overheating or damage to the fixture
that is not covered by the warranty.
Warning! Please switch off the fixture before you open any covers.
Cleaning
Optical components should be cleaned carefully and lightly. Coating
face is easily damaged, do not use harmful solvent to avoid damage
to plastic parts or coating parts.
Cleaning optical components
1. Switch off the fixture and keep it cool completely, then open the
cover
2. Clean the floats by dust collector or force pump.
3. Use cotton paper without smell or cotton cloth soaked with the
water, distilled water to wipe the granular thing, don't wipe the
surface, float things should be blown away by the pressure gas.
4. Use the cotton cloth or cotton paper without smell soaked with
isopropyl alcohol to remove the smoke and other residues. A
commercial glass cleaner may be used, but residues must be
removed with distilled water. Clean with a slow circular motion
from center to edge. Dry with a clean, soft and lint-free cloth or
compressed air.
Cleaning fan and air vents
Remove dust from the fans and air vents with a soft brush, cotton
paper, vacuum, or compressed air.
