SQ 200 User Manual
17
Video recording while parking
•
Parking Mode:
When turning off of the vehicle (ACC power cut-off), the system
switches to Parking mode after 5 seconds. When turning on of
the vehicle (ACC power on), the system switches to the Normal
recording mode.
•
Event Detection Recording: If an external impact to the vehicle is detected in Parking
mode, the Dash Camera will start video recording. (10
seconds before/20 seconds after the event, total 30 seconds
and maximum 2 mimutes) Recorded video file will be stored
in the 'parking' folder of the memory card.
•
Motion Detection Recording: If the Dash Camera detects a moving object in Parking
mode, recording starts. (10 seconds before/20 seconds after
detection, total 30 seconds and maximum 2 minutes) The
video file will be stored in the 'motion' folder of the memory
card.
Note
•
When you use Parking mode, you need to use the continuous power supply. Make sure to consult an expert for installation.
•
While parked, only motion or event detection are used for recording videos.
•
Do not cut the enclosed original continuous power cable. If it is damaged, the system may malfunction
Video recording while parking
