FIMER_PVS-50_60-TL-Quick Installation Guide_EN_RevB
8
PVS-50-TL
PVS-60-TL
AC output voltage range (V
ac min
...V
ac max
)
320...480 Vac
(1)
384...571 Vac
(1)
Maximum AC output current (I
ac max
)
80 A
Contributory fault current
92 A
Rated output frequency (f
r
)
50 / 60 Hz
Output frequency range (f
min
...f
max
)
47...53 / 57...63 Hz
(2)
Rated power factor and adjustable range
> 0.995, 0...1 inductive/capacitive with max Smax
Total current harmonic distortion
< 3.%
Maximum AC cable cross-section allowed
95 mm
2
copper
AC connection type
Screw terminal block, cable gland M63
Output Protection
Anti-islanding protection
Complying with the local standard (active frequency drift combined with RoCoF techniques)
Maximum external AC overcurrent protection 100 A
Output overvoltage protection - Varistor
Yes
Output overvoltage protection - Surge Arrester Type II
Operating Performance
Maximum efficiency (η
max
)
98.4%
98.6%
Weighted efficiency (EURO/CEC)
98.2% / -
98.4%/-
Communication
Integrated communication interface
3x RS485, 2x Ethernet (RJ45), WLAN (IEEE802.11 b/g/n @ 2,4 GHz)
Communication protocol:
Modbus RTU / TCP (Sunspec compliant); Aurora Protocol
Remote monitoring services
Standard level access to Aurora Vision monitoring portal
Advanced features
Integrated Web User Interface; Display (option); Embedded logging and direct transferring of data to
Cloud
Environmental
Ambient temperature range
-25...+60°C (-13...140°F) with derating over 45°C (113°F)
Storage temperature
-40°C...+85°C / -40°F...185°F
Relative humidity
4...100% condensing
Sound pressure level, typical
75 dB(A) @ 1 m
Maximum operating altitude
4000 m (13123 ft) with derating above 2000 m / 6561 ft
Classification of the degree of environmental
pollution for the external environment
3
Environmental category
Outdoor
Physical Specs
Environmental protection degree
IP 65 (IP54 for cooling section)
Cooling system
Forced air
Dimensions (H x W x D)
750 mm x 1100 mm x 257 mm / 29.5” x 43.3” x 10.12”
Weight
70 kg / 154 lbs (SX version)
Mounting system
Wall bracket, horizontal support
Overvoltage category according to IEC
62109-1
II (DC input) III (AC output)
Safety
Isolation level
Transformerless
Marking
CE
(5)
Safety class
I
1. The output voltage range may vary depending on the specific grid standards of each country.
2. The output frequency range may vary depending on the specific grid standards of each country.
3. In case of failure, it is limited by the external protection device on the AC circuit.
4. Please refer to the document “String inverters – Product manual appendix” available at
for information on the quick-fit connector brand and model used in the inverter
5. Only 50Hz
6. Max. installable size 20A
Note. The features that are not specifically mentioned in this data sheet are not included in the product
For more information
please contact your
local FIMER
representative or visit:
fimer.com
We reserve the right to make technical changes or
modify the contents of this document without prior notice.
With regard to purchase orders, the agreed particulars
shall prevail. FIMER does not accept any responsibility
whatsoever for potential errors or possible lack of
information in this document.
We reserve all rights in this document and in the
subject matter and illustrations contained therein. Any
reproduction, disclosure to third parties or utilization of
its contents – in whole or in parts – is forbidden without
prior written consent of FIMER. Copyright© 2020 FIMER.
All rights reserved.
23-06-2020