TYPE OF BATTERY TO BE USED
In order to perform to a good standard, the machine must be supplied with 36V of power
; we suggest using the 36V 5400mAh battery
(code 443147).
BATTERY MAINTENANCE AND DISPOSAL
Please follow the battery manufacturer's instructions for battery maintenance and charging. When the battery is dead, it must be disconnected
by a trained specialist.
N.B.:
dead batteries are classified as dangerous waste and as such must be delivered to an authorized body for disposal.
INSERTING THE BATTERY INTO THE MACHINE
The battery must be housed in the compartment provided at the rear of the machine.
WARNING:
to prevent an accidental short circuit use insulated tools to connect the batteries, and do not place or drop metal objects on
the battery. Remove rings, watches and any clothing with metal parts that may come into contact with the battery terminals.
The various phases for inserting the batteries in the battery compartment are as follows:
1. Carry out the steps necessary to secure the machine, see paragraph “MACHINE SAFETY” on page 14.
2. Remove the battery retainer (2) (
Fig.2
).
3. Insert the battery into the battery compartment at the rear of the machine, ensuring that the battery poles are facing towards the top of the
machine (
Fig.8
).
4. Press down on the battery until the retainers (3) move into position.
WARNING:
During this operation, keep the control handlebar still, in order to prevent the machine from moving accidentally.
N.B.:
for battery maintenance and daily recharging, you must fully respect the indications provided by the manufacturer or retailer.
WARNING:
all installation and maintenance operations must be carried out by specialized personnel.
N.B.:
before installing the battery, clean the battery compartment. Check that the connectors on the cables supplied are functioning
correctly.
ATTENTION:
check that the characteristics of the battery that you are looking to use are appropriate for the type of work to be performed.
Check the battery charge and the condition of the contacts on the battery.
N.B.:
Before inserting the battery into the machine, check that there is no dirt or moisture in the battery compartment.
5. Position the battery retainer (2) (
Fig.9
).
RECHARGING THE BATTERY
The battery must be charged prior to the first use, and when it doesn't provide enough power for tasks that could formerly be performed without
difficulty.
ATTENTION:
To prevent permanent damage to the battery, it is essential to prevent complete discharge thereof; this must be done by
charging the battery within a few minutes of the low battery signal being activated.
ATTENTION:
Never leave the battery completely discharged, even if the machine is not in use.
1. Bring the machine to the battery recharging area.
2. Carry out the steps necessary to secure the machine, see paragraph “MACHINE SAFETY” on page 14.
ATTENTION:
park the machine in an enclosed place, on a flat and level surface; near the machine there must be no objects that could
either damage it, or be damaged through contact with it.
ATTENTION:
The space used for charging the battery must be adequately ventilated.
3. Connect the plug on the charger power cable (12) to the socket at the base of the battery charger (13). (
Fig.10
).
4. Connect the plug on the charger power cable to the power socket (
Fig.11
).
ATTENTION:
Before connecting the plug to the socket, check that the characteristics of the mains supply correspond with those of the
battery charger (please refer to the document provided with the machine).
5. Move the main switch (14), on the base of the battery charger, to position “I” (
Fig.12
).
15