PREPARATION OF MACHINE
HANDLING THE PACKAGED MACHINE
The machine is contained in specific packaging, and since the packaging elements (plastic bags, staples, etc.) are a potential source of danger,
they should not be left within the reach of children, disabled persons, etc.
The machine's overall weight including packaging is 000Kg.
The overall dimensions of the package are: width=765mm length=1460mm height=1270mm.
N.B.:
it is recommended that all the packaging components be kept for any future machine transportation.
ATTENTION:
Move the packaged product with handling equipment that complies with legal requirements regarding size and mass of the
packaging.
HOW TO UNPACK THE MACHINE
The machine is shipped in specific packaging. To remove it, proceed as follows:
1.
Place the lower part of the outer packaging in contact with the floor.
N.B.:
Use the pictograms printed on the box as reference.
2. Remove the outer package.
CAUTION:
these operations must be carried out using protective gloves to avoid any possible contact with the edges or tips of metal
objects.
3. Make sure the electric brake is engaged, then rotate the lever (1) in the direction of the arrow. The lever is located on the rear right-hand
side of the machine (
Fig.1
).
4.
Check that the machine is off; if this is not the case, set the main switch to position "0" by turning the key (2) a quarter turn anti-clockwise
(
Fig.2
). Remove the key from the instrument panel.
5. Grip the handle (3) on the right-hand side of the recovery tank and turn the tank as far as it will go, until it reaches the maintenance position
(
Fig.3
).
6. Connect the battery hopper connector (4) to the connector of the general system (5) (
Fig. 4
).
CAUTION:
This process must be carried out by qualified personnel.
12
5
7
8
2
8
9
10
9
11
2
2
3
13
18
24
20
26
29
27
30
19
25
28
21
22
23
17
14
15
16
3
15
19
23
25
21
28
25
20
29
24
22
30
37
32
35
35
34
33
35
36
38
31
36
28
26
27
28
16
17
17
4
4
5
10
1
1
12
11
13
12
14
18
3s.
6
7
6
