17
PREPARATION OF MACHINE
ATTENTION:
The machine is equipped with an automatic system that
disconnects the power supply from the electrical system while the batteries are
being recharged.
ATTENTION:
In order not to cause permanent damage to the batteries, it is
essential to avoid their complete discharge: arrange the recharge within a few
minutes of the switching on of the "discharged batteries" blinking light.
ATTENTION:
Never leave the batteries completely flat, even if the machine is
not being used.
ATTENTION:
For the daily recharging of the batteries, you must fully respect
the indications provided by the manufacturer or retailer. all installation and
maintenance operations must be carried out by specialised personnel.
ATTENTION:
Always make sure the green LED of the battery charger is on
before using the machine again.
ATTENTION:
Danger of gas exhalation and leakage of corrosive liquids.
ATTENTION:
Danger of fire: keep naked flames at a safe distance.
17.
BATTERY CHARGE LEVEL INDICATOR
The battery indicator uses LEDs and has 8 positions (7 yellow - charged batteries, and 1 red - run down
batteries).
ATTENTION:
A few seconds after the red indicator light comes on, the brush
motor switches off automatically. With the remaining charge it is still possible,
however, to complete the drying process before recharging.
18.
ADVANCEMENT AT WORK SPEED
This machine is equipped with electronic traction control.
To move the machine, after having turned the key in the ON position, push the drive pedal (6) adjusting
the speed by pressing and releasing the pedal. The machine will then start moving.
19. REVERSE FUNCTION
To perform a reversing manoeuvre, press both pedals (6 and 7), the machine will then start moving
backwards. During reverse motion, the machine emits an acoustic signal.
6
7