16
MACHINE PREPARATION
ATTENTION:
Danger of gas exhalation and leakage of corrosive liquids.
ATTENTION:
Danger of fire: keep naked flames at a safe distance.
16.
CONNECTING THE BATTERY CHARGER (VERSIONS WITH BC)
In order not to cause permanent damage to the batteries, it is essential to avoid their complete discharge:
arrange the recharge within a few minutes of the switching on of the "discharged batteries" blinking light.
ATTENTION:
Never leave the batteries completely discharged, even if the
machine is not being used. Check the battery charger is suitable for the
batteries installed, in terms of both capacity and type.
To connect the batteries you must:
1.
Make sure the recovery tank is empty, otherwise empty it completely
2.
Move the machine near to the battery charger
3.
Engage the parking brake
4.
Put the key switch to the “OFF” position
5.
Grip the handle under the seat to open the recovery tank
6.
Lift the recovery tank until it hooks to the end of the safety clamp
7.
Connect the battery charger cable to the socket (1) on the charger itself
8.
Close the recovery tank until the prop is hooked in the first point of the safety stop
9.
Plug the battery charger cable into the mains socket.
The charger power cable is delivered inside the bag containing this instruction booklet.
ATTENTION:
This process must be carried out by qualified personnel. An
incorrect connection of the connector may cause problems with machine
functioning.
ATTENTION:
Carefully read the use and maintenance manual of the charger
that is delivered inside the bag containing this instruction booklet.
ATTENTION:
Before inserting the battery charger power cable into the socket,
verify that there is no condensate or other forms of liquids.
1