18
DAILY MAINTENANCE
PERFORM ALL MAINTENANCE OPERATIONS IN SEQUENCE
1. CLEANING THE RECOVERY TANK
1.
Remove the tubes attached to the connectors of the recovery tank cap
2.
Remove the cap and empty the tank
3.
Clean the filter under running water.
4.
Rinse the tank and clean with a jet of water
ATTENTION: users are advised to always wear protective gloves, to avoid the risk of
serious injury to hands.
ATTENTION: this operation must be carried out with the machine switched off and the
battery connector disconnected
2. CLEANING THE FRONT AND REAR SQUEEGEES
Check the rubbers of the front and rear squeegees are always clean, for good drying results.
To clean them you must:
1.
raise the machine
2.
Carefully clean inside the rear squeegee
3.
Carefully clean the rubbers of the rear squeegee
4.
Carefully clean inside the front squeegee
5.
Carefully clean the rubbers of the front squeegee
ATTENTION: users are advised to always wear protective gloves, to avoid the risk of
serious injury to hands.
ATTENTION: this operation must be carried out with the machine switched off and the
battery connector disconnected
3. CLEANING THE DEBRIS HOPPER
1.
Rotate the squeegee to the right
2.
Take the debris hopper out of its seat
3.
Clean the hopper carefully
ATTENTION: users are advised to always wear protective gloves, to avoid the risk of
serious injury to hands.
ATTENTION: this operation must be carried out with the machine switched off and the
battery connector disconnected
