EXTRAORDINARY MAINTENANCE
1.
REPLACING THE FABRIC FILTER
To replace the fabric filter, proceed as follows
1.
Take the appliance to its designated maintenance area.
2.
Do what is required to make sure the machine is in a safe condition (see
MACHINE SAFETY
’”).
3.
Free the vacuum head from the collection tank, using the lever (1) on the front rear part of the collection
tank, moving the lever as indicated by the arrow in the picture on the side.
WARNING: you are advised to always wear protective gloves, to avoid the risk of
serious injury to your hands.
4.
Using the handle (2), in the vacuum head assembly, remove the vacuum head assembly from the
collection tank (rotating it and shifting it as indicated in the figure).
5.
Remove the fabric filter (3) from the vacuum cap, making sure not to remove the seal.
6.
Replace the worn filter with the new one.
7.
Repeat the operations in reverse to reassemble.
2.
REPLACING THE VACUUM MOTOR FILTER
Proceed as follows to replace the vacuum motor filter:
1.
Take the appliance to its designated maintenance area.
2.
Do what is required to make sure the machine is in a safe condition (see
MACHINE SAFETY
’”).
3.
Free the vacuum head from the collection tank, using the lever (1) on the front rear part of the collection
tank, moving the lever as indicated by the arrow in the picture on the side.
WARNING: you are advised to always wear protective gloves, to avoid the risk of
serious injury to your hands.
Page 21
