We make umbrellas…fun
Page 4 of 6
MAINTENANCE AND CARE
REMOVING THE WINCH AND COVERING THE UMBRELLA (fig. 7 -
7a - 7b)
1.
(fig. 7) undo screw (V) and free the steel cable (Z) .
2.
(fig. 7a) release the 6 tabs (X) from the 6 ribs (W).
3.
(fig. 7b) remove the screw (V') from the umbrella attachment (R).
4.
Remove the umbrella attachment (R) from the umbrella pole(J).
5.
Remove the steel cable (Z) from the umbrella pole (J) and from the
umbrella attachment (R). In this way you can remove the winch (G) from
the umbrella (fig. 7b).
6.
Remove the cover from the umbrella pole (J).
WASHING THE COVER
1.
Remove the cover from the umbrella.
2.
Wash the cover by hand in lukewarm water 30 ºC (90 ºF)
3.
Allow the cover to dry but do not tumble dry or iron.
4.
Replace the cover on the frame.
CHANGING A RIB (FIG. 7a - 8 - 8a)
1.
Relase the 6 tabs from the 6 ribs (W) (fig. 7a)
2.
Relase the rib to be changed (W) from the housing (Y') pulling forcefully
upwards (fig.8).
3.
Rotate the rib (W) 180º and release the other end from the band (Y'') pulling
firmly upwards (fig. 8a).
4.
Change the rib repeating the above operations in reverse.
STORING THE UMBRELLA AT THE END OF THE SEASON
At the end of the season, before storing your CAPRI away, clean the frame with a damp cloth
and dry.
∆
:
Check that no parts are damaged. Should any parts be damaged contact the
dealer where it was purchased and order the spare parts.
Touch up any chipped paint.
For perfect conservation of the CAPRI during the winter months store in a dry place.
IMPORTANT:
to avoid damage caused by mould or oxidation never put your umbrella
away in wet or damp condition.