We make umbrellas…fun
Page 3 of 6
HOW TO USE YOUR UMBRELLA
OPENING THE UMBRELLA (fig.3)
IMPORTANT:
Before opening the umbrella remove the tie string and with you hands on
the ribs slightly open the umbrella.
To open the umbrella , gently turn the handle (H) of the winch G) clockwise, taking care not to
force the mechanism.
∆
:
the umbrella must only be opened when the closed umbrella is not
tilted (perpendicular to the ground).
UMBRELLA ADJUSTMENT (fig. 4)
1.
Insert the adjustment key (N) into the adjustment screw (Q).
IMPORTANT:
push the adjustment key (N) right into the screw head (Q).
2.
Loosen the adjustment screw (Q) rotating the key (N) half a turn
counterclockwise.
3.
Rotate the cantilever pole (E) using the key (N) as a lever until the
umbrella reaches the desired angle.
4.
Block the adjustment screw (Q) rotating the key (N) clockwise.
∆
:
The tilt adjustment is to be performed only when the umbrella is
open.
ROTATION OF THE UMBRELLA AROUND THE BASE (fig. 5 - fig. 2)
The frame can rotate 360º around the base and can be fixed in 20 different positions by
inserting the key (U) into the adjustment ring (O) (Fig.5).
IMPORTANT:
The key (U) must be inserted into the adjustment ring (O) at hole (a) of the
base pole (C) (fig. 2).
REMOVAL OF THE UMBRELLA FROM THE FRAME (fig. 3 - fig. 6))
1.
Close the umbrella by rotating the handle (H) counterclockwise.
∆
:
The umbrella must only be closed when it is not tilted.
2.
Loosen the handwheel (T), remove the winch (G) from the vertical pole (D)
and remove the steel cable (Z) from the pulley (S).
3.
Remove the umbrella (F) from the frame by removing attachment (R) from
the cantilever pole (E).
4.
Put the cap (L) on using the rod (I) (fig 6).