Fike TWINFLEX SRP, Инструкция по монтажу и пусконаладке

Страница: 26 / 30

TWINFLEX
®
SRP Remote Status Indicator Engineering and Commissioning Manual
26
Fire Alarm System Notice
To Enable the Control Panel Keys
To prevent unauthorised operation, the controls should be kept disabled and the key kept secure under
the control of the responsible person.
To Manually Operate the Fire Alarm Sounders
.
Following a Fire Alarm Operation
Following a Fault Condition
Enable the controls and then press ‘SOUND ALARMS’.
To silence the alarm sounders press ‘SILENCE ALARMS’.
You may gain access to the fire alarm controls by inserting the
key turning ¼ turn. The ‘Controls Enabled’ LED should then be
illuminated.
To disable the Control Panel keys, turn the key switch off.
When disabled, the ‘Enabled’ LED should then be extinguished.
The red ‘FIRE’ LED will illuminate. The fire alarms and the
internal buzzer will operate as programmed. Take appropriate
action as defined by the emergency plan for the premises.
To silence the alarm press ‘SILENCE ALARMS’, then establish
the cause of the alarm and enter the details in the log book.
Reset any Manual Call Points which may have been operated,
or if a detector has been operated be sure that the cause of
the alarm has been removed, before resetting the system by
pressing ‘RESET SYSTEM’.
The fault LED will illuminate. The internal buzzer will sound. To
mute the internal buzzer press ‘SILENCE BUZZER’.
Investigate and rectify the appropriate fault (competent
persons). Once the fault has been rectified the fault indication
will clear automatically.