Fike TWINFLEX SRP, Инструкция по монтажу и пусконаладке

Страница: 22 / 30

TWINFLEX
®
SRP Remote Status Indicator Engineering and Commissioning Manual
22
Access Level 1 (Normal)
At Access Level 1 (NMx - Normal), the main Fire Alarm Controls are disabled and only the View
Current Events Menu can be accessed. The Fire Alarm Controls will only be accessible if the key
switch is turned
to “enabled”. The Fire Alarm Controls Enabled LED will be OFF in this mode.
NOTE : When in the Normal mode, the HOME screen will automatically change to display any fires or faults or
other events from the SRP Control Panel. The latest event with the highest priority will be the event
that the SRP Control Panel displays on the RSI.
SYSTEM EVENT DISPLAY FORMAT
(FIRE, FAULTS, DISABLES, PANEL)
EVENT TYPE and Number of Events
EVENT SOURCE
EVENT DESCRIPTION
EVENT TIME AND DATE
Pressing the enter or ESC button when in Access Level 1 will show the VIEW CURRENT EVENTS
Menu with an arrow pointing to the events to be selected for viewing (Fire, Fault, Disable, Panel, or All
events). The menu may be scrolled through by pressing the
UP and DOWN arrow keys. Press the
ESC key to exit the menu.
Current Events are displayed in the format shown below and may be scrolled through by pressing the
LEFT and RIGHT arrow keys.

The top line contains the event type and number of current events of that type.

The second line contains the time and date of the event.

The third line contains the event description.
Note that these events are only the events that are currently active in the system.
CURRENT EVENT FORMAT (Showing Event 1 of 3)
EVENT TYPE and Number
EVENT TIME AND DATE (See NOTE)
EVENT DESCRIPTION
Press the ESC key to exit the menu once viewing is complete.
PANEL 01/03
08:56:06 05-MAR-2016
PANEL RESET
Press

/

/ESC
FAULT EVENT NO.3
PANEL
EARTH FAULT
12:24:59 05-MAR-2016