Fike DUONET, Руководство пользователя

Страница: 20 / 28

Duonet Control Panel User Guide
20
14. FAULT OUTPUT Yellow Flashing
A monitored output programmed to operate as a
Fault Output is in the fault state.
Continuous A monitored output programmed to operate as a
Fault Output has been disabled.
15. DAY Yellow Continuous
The system Day / Night mode timing has been
overridden, and forced into the less sensitive day
mode.
The system has gone in the less sensitive day mode
as programmed.
16.
ROUTINE SERVICE
Yellow Continuous
The pre programmed service interval has expired
and a routine maintenance check is due.
17.
TECHNICAL ALARM
Yellow Continuous
A device programmed as Technical Alarm is in the
alarm state and sending a Technical Alarm signal to
the panel. No indication of a Technical Alarm is given
on the display.
18. CONFIRMATION Yellow Continuous
A smoke detector is in the alarm confirmation state,
awaiting confirmation or reset.
19. DELAY Yellow Continuous An action has been started which utilises a
programmed delay.
20. ALARMS Yellow Flashing
Continuous The alarm sounders have been activated from the
Sound Alarms button on the panel.
The alarm sounders have been silenced whilst
operating, and the system is awaiting a reset.
21. BUZZER SILENCED Yellow Continuous
The control panel buzzer has been silenced whilst
operating and will stay silenced until another fault or
relevant action occurs.
The control panel buzzer has been disabled at
Access Level 3 (Engineer), and will remain silent
until it is reinstated. However, the panel
buzzer will
still operate in the fire alarm state.