Fike 10-071, Руководство по установке

Страница: 24 / 76

3.0 SYSTEM COMPONENTS
3-6 Cheetah Xi 50 Installation Manual UL S2203
Rev 6, 09/2015 P/N: 06-369 FM
3.3 SYSTEM ENCLOSURE
The Cheetah Xi 50 system enclosure is designed to allow mounting of the control board, AC power
transformer, optional DACT, up to two 18 AH batteries, as well as one of the following optional cards and
modules as required to suit your specific project requirements:
•
Ethernet Module, P/N 10-2627
•
Multi-Interface Module, P/N 10-2583
•
Class A Peripheral Bus Card, P/N 10-2792
•
Masterbox Interface, P/N 10-2413
The enclosure can be ordered as part of the basic equipment package as shown in Exhibit 3-2 or separately
as shown in Exhibit 3-9.
Typical Enclosure Features
•
Made of 18 gauge steel with baked on Red or Black enamel finish.
•
Each enclosure is suitable for surface or flush mounting.
•
Numerous conduit knockouts are provided in the back box for easy access to the cabinet during
system installation.
•
Press-studs supplied in enclosure back-box for easy installation of system components (i.e., Cheetah
Xi 50 control board, transformer, DACT, etc.).
•
The removable exterior door mounts on the left side of the cabinet only and is equipped with a key-
lock and display viewing window. Door opens a full 180 degrees.
•
Optional dead-front panel (P/N 10-2628) isolates the operator from the interior electronics and wiring,
yet can be easily removed to reveal system components for maintenance.
Cheetah Xi 50
10-2623-c-d
Enclosure Color c:
Enclosure Options d:
R = Red, B = Black
d = standard enclosure, with dead-front panel
Exhibit 3-9: Enclosure Ordering Format
Refer to Section 4.0 Installation, for complete dimensional specifications of the enclosure.