Pluging in the Power
Mounting the Light
Turning the Light On
Compatible Accessories
Dome Diffuser
Medium
Softbox Kit
Power Adapter
Holder Gen II
DMX
Contoller
D-Tap Cable
Fresnel Lens
11
12
13
15
16
14
1
2
6
7
8
9
10
3
4
5
Parts Diagram
1. 4 Leaf Barndoor
2. Barndoor Brackets
3. Accessory Lock
4. Side Vents
5. Yoke Knobs
6. Rear Vents
7. Light Intensity / DMX Address Knob
(DMX: P360 Pro / P360 Pro Plus Only)
8. Light Control Output Jack
(P360 Pro / P360 Pro Plus Only)
9. DC Power Input Jack
10. On / Off Button
11. CCT / Hue Tuning Knob
(Hue: P360 Pro Plus Only)
12. Light Control Input Jack
(P360 Pro / P360 Pro Plus Only)
13. Yoke
14. Light Stand Adapter
15. OLED Display
(P360 Pro / P360 Pro Plus Only)
16. Accessory Lock Release
Attach Light Stand
Adapter (14) to a
baby / junior stand
with combo pin.
Secure the light by
tightening the
locking knob.
Installing Barndoor
Slide Barndoors
into Barndoor
Brackets (2) until
Accessory Lock (3)
clicks.
Insert the DC
connector into the DC
power jack.
Press the On/Off
button to turn on the
light. The button will
turn green to indicate
that the light is on.
Releasing Barndoor
To release Barndoors,
slide back Accessory
Lock Release (16) and
slide Barndoors out of
Barndoor Brackets (2).
XLR5 (F)
Unit Link
Cable Adapter
RJ45 Unit
Link Cable
Adapter with
Coupler(F/F)
2
