Mode
Intensity
PWR
DMX
CCT
DMX
Color
Temperature
Hue
HUE
Description
Screen
Indicator
Basic Operation
(refer to Parts Diagram on following page)
•
Please read the following operating instructions very carefully before using this fixture for the
first time. They contain important information on the operation of Fiilex lighting equipment.
•
For your own safety, please follow all safety instructions and warnings.
•
Please also follow the operating instructions of the light and power adapter manufacturers.
•
Keep these operating instructions for you and subsequent users for reference in the future.
•
For further information, please ask your retailer or enquire at your local authorities. Only use
Fiilex spare parts and accessories (www.fillex.com).
• Mounting the P360 Gen II Series
The Light Stand Adapter (14) on the P360 Gen II Series can be mounted to a baby / junior stand
with combo pin. Secure the fixture to the stand by turning the tightening knob.
• Powering on the P360 Gen II Series
The P360 Gen II Series comes with a power adapter. To supply a P360 Gen II Series with power,
insert the connector into the DC Power Input Jack (9), then connect the DC plug into an active
wall socket. The fixture’s OLED Display (15) will turn on once it is receiving power. The On/Off
Button (10) can toggle the fixture’s output on and off. Settings can still be adjusted while the
switch is set to off.
• Adjusting the P360 Gen II Series
Use the Yoke Knobs (5) to lock the fixture’s tilt position. Tighten the handle to secure.
• DMX (Pro / Pro Plus only)
Insert phone jack (TRRS) connector into Light Control Input / Output Jack (8/12). Double click
Intensity / DMX Address Knob (7) to enter DMX address edit mode, the turn knob to select
address. To return to intensity adjustment mode, click knob (7) again or wait 3 seconds.
General Notes:
To adjust the brightness of the fixture, simply turn the Light
Intensity / DMX Address Knob (7).
To adjust the color temperature of the fixture, simply turn the
CCT / Hue Tuning Knob (11).
To adjust the hue of the fixture, double click the CCT / Hue
Tuning Knob (11) and turn the knob.
Control via DMX. Manual control knobs disabled. Mode
activates automatically when DMX signal detected.
1
