manualshive.com logo in svg

Fiessler AKAS-3F, Руководство по эксплуатации

Поделиться
Скачать
Fiessler AKAS-3F Скачать руководство пользователя страница 55

Terms

The press brake protection AKAS® is an electrosensitive protective device (ESPE).
ESPE is characterised by the fact that a hazardous motion becomes interrupted or prevented if the 

light beams

produced between the transmitter and receiver unit  are interrupted.

AKAS ® meets Safety Category 4 according to EN 954, e PL (Performance Level) according to EN ISO 13849-1:

2008 and SIL 3 according to EN 62061:2005 Devices to safety category 4, PL e, SIL 3 are self-monitoring

sensitive protective equipment and provide the highest Safety class among the sensitive protective equipment.

The electrosensitive protective device (ESPE) switches automatically into the "safe state" when it is faulty.

Maximum distance between transmitter and receiver is 6 m (Optional higher range, please get in contact with 
Fiessler Elektronik or your local dealer).

The part of the hazardous motion still taking place after interrupting the light beam.

The distance covered during the overrun (e.g. by the ram of a press).

The duration of the overrun  traverse.

The time that elapsed after light beam interruption until the switching action occurs.

Before every release of the output contacts the contactor control is checking whether the switching elements connec-
ted (relays, contactors or valves) have been released. A renewed release of the 
output contacts is only possible  if  the switching elements connected have been released. Thus a dangerous failure of
switching-elements (relays, contactors or valves) caused by the hazardous motion is prevented.

After initial operation or after a power supply interruption a renewed "enabling" is blocked by the start interlock.The re-
newed  release of the switching unit  is only possible by closing and opening  of the start entry.

The restart interlock prevents any automatic releasing of the switching outputs after an interruption and 
re-enabling of the light beam (e.g. when penetrating the light beam).

Short-time safe by-pass of the press brake protection AKAS® during material movement, i.e. during a plate bending
process.

By-pass of the receiver unit 

E1

 (AKAS®-LCM,  AKAS®-LCF, AKAS®-IIM, AKAS®-IIF) resp. 

E3-E6

  

(AKAS®-3M, AKAS®-3F), during a box-bending process. 

55

 Electrosensitive protective

equipement

Safety category 4

PL e, SIL3

Self-monitoring

Standard Installation range

Overrun

Overrun traverse

Overrun period

Response time

Valve or contactor control

Start interlock

Restart interlock

Muting

Box-bending

11

Doku Nr. 988 Stand 3.2.2016 / Aui

FIESSLER

 

E L E K T R O N I K

Содержание AKAS-3F

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды