manualshive.com logo in svg

Fiessler AKAS-3F, Руководство по эксплуатации

Поделиться
Скачать
Fiessler AKAS-3F Скачать руководство пользователя страница 11

Description and fields of application for the equipment

General Instructions

11

with Support:

AKAS®-3
AKAS®-II

without Support:

AKAS®-LC

                     

Serial Numbers

AKAS®-3
AKAS®-II

AKAS®-LC

3

3.1

fig. 11/ 1

matrix

matrix

bending punch

bending punch

Support

Support

Support

Support

ram

matrix

transmitter

receiver

fig. 11/ 2

Doku Nr. 988 Stand 3.2.2016 / Aui

suspension devices with electromotor driven

supports:
the System AKAS®-3 automatically adjusts on-

to the required distance  to the bending punch

after a tool change.

The laser - accident preventing light barrier AKAS® is an electro sensitive protective and controlling device
(ESPE) which has the function  to protect  operators from accidents.
This happens as follows : Before a part of the body is squeezed between two opposed moving machine parts,
this part of the body interrupts at least one light beam. By this means the movement of the machine is stopped,
before it comes to an injury. 

AKAS®

- meets IEC 61496, Type 4
- is self- monitoring without additionally  wiring.
- easy to adjust after tool changing.

Operative range for the laser-accident preventing light barrier of the AKAS® types are: 

press brakes

AKAS®-3M /-3F

, 

AKAS®-IIM /-IIF

: equipped with electromotor driven supports for transmitter and receiver for

self-acting  tool change if tools with diefferent heights are used (see fig. 11/1).

AKAS®-LCM /-LCF

:  is recommended if there are no freqent tool changes or in case if extended operation with

the same tool is required, therefore no re-adjusting to different tool sizes is necessary. (see fig. 11/2).

suspension devices with mechanical adjust-

ments:
if there are no freqent tool changes or in case

if extended operation with the same tool is

required

The serial numbers are located at the front side of the housings of both transmitter and receiver supports. 

The serial numbers are located at the down  side of the housings of both AKAS®-LC transmitter  
und AKAS®-LC receiver.

FIESSLER

 

E L E K T R O N I K

Содержание AKAS-3F

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды