2
2-22
Setting up the Fiery X2
LPD Setup options
Windows Setup options
Use WINS Name Server
Yes/No [No]
Broadcasts from SMB devices cannot be routed without a WINS name server. Setting
up the WINS name server is outside the scope of this manual. To find out if a name
server is available, contact your network administrator.
WINS IP Address
[127.0.01]
This option appears only if you choose Yes for WINS Name Server. The address is set
to the loopback address. Replace this with the correct IP address for the WINS Name
Server. Obtain the correct address from your network administrator.
Network Setup
Service Setup
LPD Setup
Enable LPD
Yes/No [Yes]
Select
Yes
to allow lpd printing. See “Setting up the Fiery X2 on TCP/IP networks”
on page 4-28 for more information.
Network Setup
Service Setup
Windows Setup
Enable Windows Printing
Yes/No [No]
Enabling Windows Printing enables SMB (Server Message Block), the built-in file
and printer sharing protocol built into Windows. Enabling SMB allows the
Fiery X2 to be listed on the network so that Windows clients can print to a
particular queue (Hold, Print, or Direct) on the Fiery X2 without any other
networking software. For information on how to set up a Windows computer for
Windows printing, see Getting Started. Windows printing runs via TCP/IP,
so TCP/IP must be configured on the Fiery X2 and on all workstations that use
Windows printing.
