2
2-34
Setting up the Fiery SI
Apply/Overwrite Calibration?
Yes/No [Yes]
Choose
Yes
if you are satisfied with the calibration shown in the comparison page. The
newest calibration overwrites any previous one.
Choose
No
if for any reason you are not satisfied; you return to the main Calibration
setup screen.
This affects all users. Continue?
Yes/No [Yes]
This is a reminder that calibration is a global setting; if you overwrite calibration, every
print job is affected by the new calibration.
If you choose
Yes
, calibration is overwritten and you return to the main Calibration
setup screen. If you are finished, choose
Exit Calibration
.
If you choose
No
, calibration is not overwritten, and you return to the main Calibra-
tion setup screen.
Remove Calibration
Choose Remove Calibration when you wish to return the printer to its uncalibrated
state. You do not need to remove a calibration before applying a new calibration.
This affects all users. Continue?
Yes/No [Yes]
This option is a reminder that calibration is a global setting; if you remove calibration,
every print job is affected by your action.
If you choose
Yes
, the current calibration is removed and you return to the main Cali-
bration setup screen. If you are finished, choose
Exit Calibration
. The Fiery SI must
reboot to continue.
If you choose
No
, the calibration is not removed, but you still return to the main Cali-
bration setup screen.