Fiery Fiery EX12 Color server, Руководство по установке

Страница: 31 / 108

1
1-15 Setting up PostScript printing with Windows NT 4.0 or Windows 2000/XP
4. Enter the network path for the printer.
The path for the printer is the IP address or the DNS name, followed by ipp , and then
by the Fiery connection you want to print to (
print
,
hold
, or
direct
). Insert slashes
between the elements, for example, http://10.10.10.150/ipp/print .
5. Click OK.
Setting up PostScript printing with Windows NT 4.0 or
Windows 2000/XP
To set up the Fiery as a PostScript printer, you must install the PostScript printer driver
for Windows NT 4.0 or Windows 2000/XP and the corresponding printer description
files. You must also configure the print connection between the computer and the
Fiery. If you are printing over a network, you must configure a network connection.
The following procedures describe the installation of a local printer. Adding a printer
to a local system requires that you log in to your local Windows NT 4.0 computer
(not the network server domain) and that you are a member of the Administrators
group. The procedure for adding a network printer is similar to adding a port. See
“Completing the Windows NT 4.0 TCP/IP and LPR connection” on page 1-27.
If you are printing using SMB on Windows NT 4.0, you can connect to the Fiery and
install the printer drivers in a single procedure; see
page 1-34 .