Fiery Fiery EX12 Color server, Руководство по установке

Страница: 17 / 108

1
1-1 Setting up PostScript printing with Windows 9x/Me
This chapter describes the procedures for installing software and setting up printing
from a computer using a supported version of Windows. For Windows versions
supported, see the
Quick Start Guide .
The general steps for installing the software are as follows:
• Install the PostScript printer driver and corresponding printer driver files, and set up
the printer driver to communicate with the Fiery.
• Install Fiery utilities.
For Fiery EX12: Fiery Graphic Arts Package (available as an option), EFI Fiery Mail
Port, Fiery Remote Scan, Fiery Downloader, ColorWise Pro Tools, Fiery Printer
Delete Utility, Fiery VDP Resource Manager, and Command WorkStation
For Fiery EX2000d: Fiery Graphic Arts Package (available as an option), EFI Fiery
Mail Port, Fiery Downloader, ColorWise Pro Tools, Fiery Printer Delete Utility,
Fiery VDP Resource Manager, and Command WorkStation
• Configure the connection for Fiery utilities.
• Install Adobe Acrobat 4.0 and PitStop software on the designated Windows
computer(s).
• Copy additional files from the User Software CD as required.
In addition to using the User Software CD, you can download printer drivers from the
Fiery with the Installer WebTool (if the administrator has enabled Internet access to
the Fiery). For instructions, see
“Using the Fiery WebTools Installer” on page 3-2.
Once you download the printer files, the installation process is identical to installing
from the User Software CD.
Setting up PostScript printing with Windows 9x/Me
To set up the Fiery as a PostScript printer, you must install the PostScript printer driver
for Windows 9x/Me and the corresponding printer description files. You must also
configure either a parallel connection for printing directly or a network connection for
printing over the network.
Chapter 1:
Installing
User Software
on a Windows
Computer
EX12
EX2000d