2
2-3
Printing from applications
In the Paper Source pop-up menu, specify the paper tray to use for the job. For
example, you can specify that the job should be printed on pages in the Bypass tray.
Tray selection is valid for the current job only.
N
OTE
:
If paper loaded in the selected tray is a different size, orientation, and/or media
type than that of the job you are sending, the DocuColor displays an error message and
the job will not print. You should then load the correct paper in the selected tray or
cancel the job.
3.
From the General pop-up menu, choose Notes.
In the Notes 1 and Notes 2 areas, enter user and job identification information for
accounting purposes, or whatever information is required at your site. The notes you
enter in these areas appear in the Job Log.
4.
From the Notes pop-up menu, choose Printer Specific Options.
5.
Select the appropriate settings for your print job.
These print options are specific to the DocuColor. They override settings in Printer
Setup on the DocuColor Control Panel; you can also override some of these settings in
the WebSpooler or in the Spooler Override Print Settings dialog box. For information
about these options and overrides, see Appendix D, “Setting Job Overrides.”
