manualshive.com logo in svg

FieldServer FS-8700-74, Руководство пользователя

Поделиться
Скачать
FieldServer FS-8700-74 Скачать руководство пользователя страница 23

FS-8700-74 Veeder Root Driver Manual 

 

 

 

 

 

Page 23 of 33

 

FieldServer Technologies

 1991 Tarob Court Milpitas, California 95035 USA  

Web

:www.fieldserver.com 

Tel

: (408) 262-2299   

Fax

: (408) 262-9042   

Toll_Free

: 888-509-1970   

email

: [email protected] 

Error 

Action Required 

*VRoot:#13 Err. Device 
Rejected message. 
Md=<%s> 

This message is generated the first time that the Error Statistic 
‘Function Error’ is produced.  This error can arise in several 
ways. The firmware version of the Veeder-Root device may not 
support the poll generated by the Map Descriptor. The Veeder-
Root device may not have the tank/sensor/device specified or it 
may arise if the message received by the Veeder-Root device is 
corrupted.  If there are a significant number of these errors then 
use Appendix A.2 to determine if the firmware supports the poll.  
You can also check the devices configured against the address 
specified in the Map Descriptor. 

*VRoot:#16 Err. Array too 
short to store. Md=<%s> 
Rqd=%d 

When this error is produced incoming data is being discarded 
and alarm or other data will not be updated. There are a few 
variations on this message. Some do not report the Rqd length.  
This message is produced as a run-time error. It may arise from a 
configuration error that has not been corrected.  Check for Error 
#7 messages.  If there are any correct the errors by editing the 
CSV file. Then reset the FieldServer.  If the driver is still 
producing error 16 then you should report this to FieldServer 
support.  Provide a copy of your configuration file and a port log 
to assist in the diagnosis of this error.  

*VRoot:#17 Err. Array too 
short to store. Md= <%s> 
ByteArray 

This error is similar to #16 except that it applies to the array 
named in the DA_Byte_Name parameter for the Map Descriptor. 

*VRoot:#18 Err. Array too 
short to store. Md= <%s> 
Float Array 

This error is similar to #16 except that it applies to the array 
named in the DA_Float_Name parameter for the Map Descriptor. 

VRoot:#19 Err. Cant 
process msg type= %x 

You cannot take any corrective action to eliminate this error. 
Report the message to FieldServer support. It will assist in the 
diagnosis of the error if you can take a port log and provide a 
copy of your CSV file. 

*VRoot:#20 FYI. Incoming 
data is being abandoned. 
Func= %x DT= <%s> 
Addr=%d 

This message is a warning. It indicates that a response to a poll 
contains data for which a Map Descriptor cannot be found to 
store the data. For example: The response to  poll for System 
Status returns an alarm for Liquid Sensor #3 but you have not 
defined a Map Descriptor for Liquid sensor #3.  You may be able 
to use the Data Type and the Address to determine what kind of 
Map Descriptor is required. If, however, you are satisfied that you 
have Map Descriptors for the data of interest to you then you may 
safely ignore this message. 

*VRoot:#21 Err. Md=<%s> 
not bound to a port. Can’t 
be used.

 §

 

Read the notes for Error #4 to see how to correct this problem. 

Vroot:#22 FYI. Config 
reported zero modules. 

You may ignore this message. The Veeder-Root device reported 
zero configured modules in response to a configuration enquiry. 

*VROOT:#23 Err. Address= 
0 invalid for this command. 

Set the address to a positive number corresponding to the 
tank/sensor/input/device whose data you are polling for. 

                                                 

§

 

This is a configuration error which can be eliminated by correcting an error in the CSV file and resetting 

the FieldServer.

   

Содержание FS-8700-74


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды